|
Xypex® Products
Xypex Patch'n Plug
Description
Xypex Patch'n Plug is a specially designed, fast-setting, non-shrink, high-bond-strength,
hydraulic cement compound for concrete patching and repair. Patch'n Plug stops flowing water
in seconds and is used to seal cracks, tie holes, and other defects in concrete. The high
performance characteristics of Patch'n Plug are enhanced by Xypex's unique crystalline
waterproofing technology.
Recommended for:
- Stopping an active flow of water through cracks
- Repair of concrete substrates before the application of Xypex coating materials
Advantages
- Single component (simply add water)
- Fast setting: two to three minutes at 70ºF (21ºC)
- Excellent structural strength
- As durable as the masonry and concrete to which it is applied
- Non-metallic (won’t rust or deteriorate)
- Non-toxic
Packaging
Xypex Patch’n Plug is available in 20 lb. (9.1 kg) pails and 60 lb. (27.2 kg) pails.
Storage
Xypex products must be stored dry at a minimum temperature of 45ºF (7ºC). Shelf life is
one year when stored under proper conditions.
Coverage
One 60 lb. (27.2 kg) pail of Xypex Patch’n Plug will produce 0.54 cubic feet (0.0154 cu.
meters) of mortar.
Test Data
| Physical Properties |
Test Method |
Typical Results |
| Comprehensive Strength |
ASTM C109 |
psi |
(MPa) |
| at 24 hours |
|
2100 |
(14.3) |
| at 7 Days |
|
3100 |
(21.3) |
| at 28 Days |
|
4500 |
(31.0) |
| Setting Time |
ASTM C266 |
minutes |
seconds |
| Initial Set |
|
3 |
50 |
| Final Set |
|
9 |
10 |
| Tensile Bond Pull-Off |
CSA A23.2-6B |
psi |
(MPa) |
|
|
120 |
(0.8) |
Note: Samples prepared with 1 part water to 3.25 parts dry powder by volume (1 part water to 4
parts dry powder by mass). Setting time was determined using Gilmore needles.
|
