IMX Technologies - Xypex Concrete Waterproofing

Description
Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to damp-proof the exterior of foundation walls. Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where damp-proofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

Recommended for:
Xypex Modified is recommended as a single coat for the damp-proofing of foundations or as a second coat with Xypex Concentrate for the following applications:

Resists extreme hydrostatic pressure
Becomes an integral part of the substrate
Allows concrete to breathe
Resistant to aggressive chemicals
Non-toxic
Does not require dry weather or a dry surface
Cannot puncture, tear or come apart at the seams
No costly surface priming or leveling prior to application
Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
Can be applied to the positive or the negative side of the concrete surface
Does not require protection during backfilling or during placement of steel, wire mesh or other materials
Less costly to apply than most other methods
Not subject to deterioration
Permanent

Packaging
Xypex Modified is available in 60 lb. (27.2 kg) pails and 50 lb. (22.7 kg) bags.

Storage
Xypex products must be stored dry at a minimum temperature of 45ºF (7ºC). Shelf life is one year when stored under proper conditions.

Coverage
For normal surface conditions, the coverage rate for each coat is 6 - 7.2 sq. ft. per lb. (1.25-1.5 lb. per sq. yd. or 0.65 - 0.8 kg/m2).